Method 1: Remove the shower hose and use a brush to clean the areas where there is limescale. Some showers are specially equipped with shower head opening tools when they are sold, which is convenient for consumers to use. Adjust the white vinegar and water in a 1:1 ratio, and...
The use temperature of the shower hose should not exceed 70°C. High temperature and ultraviolet light will greatly accelerate the aging of the shower and shorten the service life of the shower. Therefore, the shower should be installed as far away as possible from the heater and other electrical heat...
Pay attention to the maintenance of the shower hose. Most of the shower hose leaks are related to improper use. The leaking places are often the parts that are often bent by us. These parts are subject to huge force for a long time, so they are easily damaged. Therefore,...
In normal life, sometimes you find that the faucet still drips after being tightened, and it drips from the faucet outlet or the joint, which not only causes a lot of waste, but sometimes the sound can also cause certain troubles. In fact, the structure of the faucet is very...
First, prepare the installation tools and check whether the supporting parts are complete before installation. Common faucet parts include hoses, rubber washers, showers, water drains, crutches, decorative caps, etc. 1. Installation of single-hole basin faucet When buying a single-handle basin faucet, you should pay attention to the diameter of the spout. Most...
(1) Do not wipe the surface of the faucet with hard objects such as steel wire balls, because the steel wire balls are very hard and will easily scratch the surface of the faucet. (2) It is best to clean with a neutral cleaning agent, and cleaning agents with strong acid...
1. All impurities in the pipeline should be thoroughly removed during installation. It can avoid damage to the spool, jamming, blockage and leakage. At the same time, the surface should be cleaned so that there are no residues of building materials. 2. For any kind of faucet products, there is no...
Weight: You can't buy a faucet that is too light. Too light is mainly because the manufacturer hollowed out the copper inside in order to reduce costs. The faucet looks large, not heavy to hold, and it is easier to withstand the water pressure burst. Handle: The compound faucet is easy...
