Como deve ser substituída a mangueira do chuveiro do banheiro?

O chuveiro é a configuração padrão em todos os tipos de móveis de banheiro. O chuveiro e a mangueira tornam o chuveiro muito conveniente de usar. Como uma mangueira que proporciona flexibilidade, é relativamente fácil danificar uma parte do chuveiro. Problemas comuns incluem vazamento de água, rachaduras, etc.. In these cases, the hose needs to be replaced.

① Installation preparation: Primeiro, replace the broken hoses, and unscrew the shower hoses at both ends of the shower and faucet by hand. Some showers have hexagonal nuts on the design, which can be used with the help of wrenches. Tools. In this step, you can clean the interior of the shower by the way to see if there are impurities such as fine sand.

② Installation steps: Align the connector of one end of the shower hose with the connector of the shower, and screw it along the threads. Claro, this also requires effort; then connect the other end of the shower hose with the faucet, this end is not so much. Good operation, after all, the faucet is fixed, and some auxiliary tools are needed.

③ Precautions When installing the shower hose, it is not recommended to be operated by a girl. Not only is the hand weak and hurts, but also there is no guarantee for the tightness of the shower hose installation. Ao mesmo tempo, the installed cartilage needs to pay attention to maintenance. Do not leave the shower hose in a crimped state for a long time, which is very easy to cause damage to the hose, so try to keep the hose in a natural stretched state.

The above is the introduction of the steps for replacing the hoses of the shower. De forma similar, if you want to replace the shower nozzles, the same steps are used. It should be noted that there are many types of showers on the market, and the connection methods of some showers may be different, and you need to analyze the specific situation.