Việc bảo trì vòi hoa sen là rất quan trọng

1. Loại bỏ quy mô: sáu tháng một lần hoặc ít hơn, remove the shower head and place it in a small basin, water the exterior and interior of the shower head with edible white vinegar and soak for 4-6 hours, and then use a cotton rag to clean the shower head quietly. At the outer spout, install the connector from the beginning and pass the water for a while, wait for the white vinegar and scale to flow out with the water to eliminate or reduce the influence of scale on the shower, and have a certain sterilization effect.

2. Faucet plating surface package: often use a soft cloth with a small amount of flour to scrub the shower plating surface, and then rinse with water to make the shower surface shiny as new.

3. Do not use strong acid when removing scale to avoid corrosion on the shower surface.

4. Please do not disassemble the shower with confidence for maintenance. Improper disassembly will damage the appearance and internal structure of the product.

5. The ambient temperature of the shower head cannot exceed 70℃. High temperature and ultraviolet light greatly accelerate the aging of the shower head and shorten the service life of the shower head. Therefore, the installation of the shower head should be as far away as possible from the heat source of electric appliances such as Yuba. The shower head cannot be installed directly under the Yuba, and the distance should be above 60cm.